ZF Ecomat/Ecolife Transmission Script 1.00 RC9

Awesome work except the D86 that I can't play till now

i got some problems with the buses but I don't know if these are really bugs or just specially designed settings:

SD83 ZF4HP500: gear selector, except 1, can't lock up gears properly

SD83 ZF4HP500SE:
1. If "1" is pressed when starting the bus(not engine but making it moves from stationary), the bus can't run properly, like losing power
2. Sound for upshift from 2 to 3 appears earlier than actual gear shift (such situation won't occur when kickdown is applied)

D89: pressing "2" shifts gear from 5/6 to 3/4

so troublesome posting so many Qs just hope you don't mind

My Problems:
I have now 3 SD83 ZF's. One at the bottom Line, which i can't use and i don't now which file i must delet it.

The D86 won't work.

The SD83 ZF Normal has no breaking sound.

zavage schrieb:

My Problems:
I have now 3 SD83 ZF's. One at the bottom Line, which i can't use and i don't now which file i must delet it.

The D86 won't work.

The SD83 ZF Normal has no breaking sound.

The only two outstanding files are

MAN_SD83_ZF.bus and MAN_SD83_ZF-b.bus

Also redownload this should correct the D86 loading up.. the no braking sound, no idea how to fix that

http://www.philadelphiatransitvehicles.info/OMSI/ZF_1.00B_Patch.zip

I found it in the MAN SD202 folder. Thanks
I Downloaded it and then when i choose the D86:
Zugriffsverletzung bei Adresse 004E5B68 in Modul "Omsi.exe" . Lesen von Addresse 1F9AE8F4.
And this: Fehler: im Befehl "(C.L.Matrix_Changetime_Nur)" (vehicles/MAN SD202//script/Matrix_D.osc) <SC_ErrorInCommand_constantinvalid>

I have the same problem as zavage... the D86 is not working.

Jannik schrieb:

I have the same problem as zavage... the D86 is not working.

found the cause and has removed the download, going to replace it with version 1.00 beta RC2. Sorry for the confusion, there are over 100 files to keep track of spanning over two folders.

-Found that it was an cause of an missing file, apparently the transmission consist file for the D86 was not included in the package, but since i updated the script, decided just to release newer version. Sorry for the confusion, when dealing with over 50 or so files with many of them shared between two directory's, things can get confusing

-Changes log
-ditched version 1.0 and it has been replaced with Version 1.0 RC 2
-Fixed the gear selections on the ZF ecomat I, if one is selected, the bus will stay in the 1st gear, if lock up in second gear is selected, the transmission will remain in 1st unlock, if lockup in first gear opition is selected, the bus will lock up in 1st gear and stay in second gear
-rethought my position on the start in 2nd gear option, I only restrict that to the earlier version of the ZF for now. On my to do list, will give the user the opinion to do whatever via the consist file

buses to be installed:


Adds six buses to OMSI

SD200 - SD83 - ZF 4HP-500 SE \MAN_SD200\MAN_SD83_ZF.bus
SD200 - SD83 - ZF 4HP-500 \MAN_SD200\MAN_SD83_ZF-b.bus
SD202 - D86 - ZF 5HP-500 \MAN_SD202\MAN_D86_ZF.bus
SD202 - D89 - ZF 6HP-592 \MAN_SD202\MAN_D89_ZF.bus
SD202 - D92 - ZF 6HP-502 \MAN_SD202\MAN_D92_ZF_6HP502.bus

Consist file:

SD200 - SD83 - ZF 4HP-500 SE \MAN_SD200\gearbox_ZF_Ecomat_I_4HP-500.txt
SD200 - SD83 - ZF 4HP-500 \MAN_SD200\gearbox_ZF_4HP-500-earlier.txt
SD202 - D86 - ZF 5HP-500 \MAN_SD202\gearbox_ZF_Ecomat_I_5HP-500.txt
SD202 - D92 - ZF 6HP-592 \MAN_SD202\gearbox_constfile_ZF_6HP-592.txt
SD202 - D89 - ZF 6HP-502 \MAN_SD202\gearbox_constfile_ZF_6HP-502.txt



If any additional bus appeared in the bus selection menu, go into these directories \MAN_SD200\ and \MAN_SD202\ and delete all of the *.bus files with the "_zf", then reinstalled the package in the vehicles directory. After doing that, make sure that these buses no longer appear in the bus selection menu. If they do, then the *.bus is installed in the wrong directory, eg.. \MAN_SD200\sounds. So use the windows search option. None of the packages has the *.bus files accidently placed in any of the directory besides the main one of that bus.

Download: http://www.philadelphiatransitvehicles.info/OMSI/ZF-Script-1.00RC2.zip

Zitat :

D89: pressing "2" shifts gear from 5/6 to 3/4

If the prior gear is within range, it will downshift an gear - you can control the range by opening up the consist file and look for these values


[const]
antrieb_getr_manualMaxSpd1
484

[const]
antrieb_getr_manualMaxSpd2
944.278607

[const]
antrieb_getr_manualMaxSpd3
1378.391608

[const]
antrieb_getr_manualMaxSpd4
2000


[const]
antrieb_getr_manualMaxSpd5
2490.391608

ya......it's me again.

I'm so sorry to tell you that there are so many bugs in RC2......

the SD83 SE:
the 1st gear looks like losing power and it does not change to gear 2, 3, 4......

the D86:
does not change gear and the bus becomes "crazy" when applying brakes

and the D92 with ZF 6HP502 cannot be loaded

thank you

Fantastic work krtz07 - I know this must take a lot of time and effort and the results are top-class and the sounds are great. Much appreciated!

I upload now a Video for the D86 Bug, the D92 6HP-502 will not work, it's the same error as i posted.

Here is the Video:

reiussed the RC2 download to fix that error, apparently the wrong script file was used for the D86

Great update (although I've only tried the D92), just one or two things. Firstly the wooing sound going into 3rd across to 4th (I think it's those gears) is very loopy... at higher revs it keeps repeating itself and it's really annoying lol. The other thing is if you rev it in neutral the revs take a very long time to return to idle once you let go of the throttle. The script itself is fantastic though, I love it

krtz07 schrieb:

reiussed the RC2 download to fix that error, apparently the wrong script file was used for the D86

RC2 does same like earlier version.

I Have Relly Heavy Problems with the Last Version, the D92 is Multiply in my List and most of them i mean the other Busses like SD83 crashes my Game.
Also the HP D92 has other Numbers from 1101 until 1125.
I Hope i can drive the Normal Busses :/

Here is the List:

SD200 - SD83 - ZF 4HP-500 Doesnt Work
SD200 - SD83 - ZF 4HP-500 SE Doenst Work
SD202 - D86 - ZF 5HP-500 Work
SD202 - D89 - zF6HP502 Work
SD202 - D92 - ZF 6HP-592 Work
SD202 - D92 - ZF 6HP-502 Doesnt Work, Value Error With the Matrix

Done something which I did not want to do and reinstalled OMSI to get to the bottom of this. Apparently I have found that the Sd83 was missing the cockpit_83.osc file, secondly, the Sd92 with the 502 was missing its consist file. That is the cause of the errors, everything else tested out normally. This is one the default version of omsi.


RC3 hopefully not a fail!!
Changelog
- Should have all of the files which were missing in version RC1 and RC 2, Hopefully!!
-Fixed the Ecomat I bug where the transmission would act funny in the 1st gear/gang
-fault found in the script which caused the sudden acceleration on the Ecomat I script. Apparently one of the endifs was missing.


http://www.philadelphiatransitvehicles.info/OMSI/ZF-Script-1.00RC3.zip

Yes the Sd92 - 592 fleet numbers are between 1101-1125, was not too sure if the AI was going to conflict with that. So decided to renumber them.

Also do not load up SD202 - D92 - ZF 6HP-502 until the next verison, I do know that there is an bug, but if you want to fix the bug, open up the engine_constfile_D92_ZF_D281.txt file. Go to

Code:

[newcurve]
governor
[pnt]
0
1

[pnt]
1
0

[pnt]
1.1
-1

Replace that with these values

Code:

 

[newcurve]
governor
[pnt]
98.5
1

[pnt]
100
0

Hy !
I'm new here and I'm have a problem: When I select a ZF (1.00 or RC.2,RC.3) bus I have an error : "ungültigeie dateiname" , then "zugriffsverletzung bei adress 004E5B45 in modul Omsi.exe. Lesen von adresse 00000018.
Please help me, whats the problem
And if I press 2nd gear in selector it starts in 2. gear (second one ?) and Its shift up only for third gear, but in the real life if select 2nd in the selector, its shift up from 2 to all gear.
Sorry for the very bad English, I' m from HungAry.
Thanks: Geri556

It's nearly perfect, the SD83 ZF Normal has a bug: When i choose "2", it reacts same as "3".

The D92 ZF6HP-502 has some glitches between the 2-3 and 1-2 or in that way. it sounds not very well.

I really like you're zf sound. But after the update i have a few questions.

1) the two D83 buses with zf are not so good. After totally top the bus there is a sound to hear why?
2) downshift from D92 can much better i think?

I real like the loud gear change.
Great work!!

I hear from you about my questions i hope.

Ps. sorry for my bad English

There is no kickdown (yet)?

On the Sd83 within the package, not really but I am working on it. The stage where the bus has to relock up again causes some issues...I think I got it all sorted out though.


On the Sd92 592, sure, but you have to know how to work it, the kickdown on the Sd92 will activate if you are decelerating at around 35-40 kph or so, if you re floor it sharply, the gears will kickdown to the 2nd gear for a few seconds. Going to see if I can get topodyn implemented on the other throttle settings as well to make the kickdown more noticeable. Another feature is, if you were to double tap the gas in 1st gear, the bus will hold the gear, but again that is still being worked on..

I think the gears (or some at least) also kick down if you double tap the gas.

krtz07 schrieb:

On the Sd83 within the package, not really but I am working on it. The stage where the bus has to relock up again causes some issues...I think I got it all sorted out though.


On the Sd92 592, sure, but you have to know how to work it, the kickdown on the Sd92 will activate if you are decelerating at around 35-40 kph or so, if you re floor it sharply, the gears will kickdown to the 2nd gear for a few seconds. Going to see if I can get topodyn implemented on the other throttle settings as well to make the kickdown more noticeable. Another feature is, if you were to double tap the gas in 1st gear, the bus will hold the gear, but again that is still being worked on..

I downloaded the RC3 version once more and it's working fine. I don't know why not working before, but now it's great! Thank you very much!
(Excuse me for my english mistakes.)

SD202 - D92 - ZF 6HP-502 is not working, it isn't gear up from 1st gear so it's max speed is about 5 km/h
If i push the throttle with it, the rpm falls, and the battery light blinking.

disc schrieb:

SD202 - D92 - ZF 6HP-502 is not working, it isn't gear up from 1st gear so it's max speed is about 5 km/h
If i push the throttle with it, the rpm falls, and the battery light blinking.

there's the solution on p.16

Very, very nice work! :-) But does this mod also have a kickdown? Is there also a retarder-function?