ZF Ecomat/Ecolife Transmission Script 1.00 RC9

krtz07 schrieb:

All in due time

Just wanted to say your great work is much appreciated, and I hope you release them soon, or even, just focusing on one at a time so we can try (and test!) at least one

krtz07 schrieb:

[...] Now currently have the sounds working on the Ecomat 6Hp-592 with the Man D2866 Engine. Gear whine, upshift sounds, etc. All I have to say is that bus is powerful, yet it rides smooth and sounds smooth.[...]

You are the best

I look forward to try it. I hope you will release them very soon

Great News that you made a 6 Speed ZF on the D92.

And then with sounds, too.

I got the Earlier version of the ZF Ecomat I - Pre 1986 sound whine somewhat function able in OMSI. I have not really touched much of that consist values in the yet as I know powerbycng wants to make it shift as realistic as possible. Once he makes his adjustments, I will applied these adjustments to the sound files, and then we will be in business.

Here are the files as they stand right now, just an little disclaimer, Only the sounds on the D92 has been reworked with the gear whine. i did done some engine wave file editing on the SD_83 post-1985 ZF transmission retrofit to drop the gearwhine sound which apparently was in the engine. The Man 2566MUH idle sounds were provided by powerbycng. I have open up audacity and try to get some intermediate sounds by using the change of speed function for 770 and 1332 rpm. This is my first time trying to dive into sound editing for OMSI. Have not done much more heavy sound working on the Second generation of the 4HP-500 just yet.


Some of the Sd92 ZF Ecomat II sounds were provided by omsikenli. Apparently the sound file provided was made of that of an bus going up an steep in climb. All which OMSI needed was a few seconds of the constant gearwhine sound on a higher ratio gear.. eg..gear two. Then tell the simulator to specified the volume and axle position of the noise in each gear. All of the values needs to be relative to the engine rpm though. Long story short, it sounds like something in the ZF family. Decided to do more work on this transmission because around here in the Northeast, roughly 320 buses in my local transportation agency has this transmission. I purposely gave the bus an lower final drive ratio in the 4 range, some may argue it is too low, however, I purposely done that since the transmission is couple to an powerful Man D2866 engine. The high torque and lower rpm shift speeds make things smooth. Further down the line, maybe after verison 1.0, I will add LBSS shifting to this transmission. Hopefully the SDK will be release sometime soon, so I can get a good handle on the system variables. If there is an variable or function for change in height or gradient of the road, i would want to utilized that.

The retarder has been reworked on all three of the transmissions, no sounds for it yet but the retarder on the Voith sounds similar. The retarder now takes 5 seconds to fully kick in, however, the braking is just as good yet it is extremely smooth. since I have started test driving the D92, my overall percentage of driving went from 30% up to 100% extremely fast. The Voith retarder start sounds has been removed, but I have retained the base sound for now.

Download:
http://www.philadelphiatransitvehicles.info/OMSI/ZF-Script-0.7.zip

some problems with D86... upshifting from 3 to 4(around 40) does not work.. i have to lock gear 3 and the upshifting works well beyond 40km/h

and i can't enter the game using D92..

@krtz07: There's something wrong with the files of the D92, I just can't get it up and running... Could you fix this please?

Stefan schrieb:

@krtz07: There's something wrong with the files of the D92, I just can't get it up and running... Could you fix this please?

In Philadelphia time is about 5 a.m now, so...

There are two files missing.
The engine_constfile_D92_ZF_D28.txt and the gearbox_ZF_6HP_592.osc

But I changed this gearbox_ZF_6HP_592.osc to this gearbox_zf_6.osc
But the other file is really missing.

EDIT: You have to download THIS
Then it should work

I just updated the files with the fix.

There also seems to be no idle sound for when you're in neutral and when you're almost at a complete stop (I assume it's the same file)

By the way, which link did you update?

Wel, when I want to take the D92 ZF there comes this error:

I get the other error still with the D92.

krtz07 for the engine sounds did you use my MAN D2866 sounds? I had got a modern axle sound aswell, so it will be interesting to here if yours is better (I'm sure it will be )

I get that always, when i want to chose the d92 ZF and the D83 in this Version. The D86 ZF works finde, but no ZF Sound and the other SD 83ZF and SD 83 ZF 2 Variant theres no sound when it's not in the gear.

I can't get into the game with D92 ZF

D86 works well but the gearbox gets stuck between the 3rd and the 4th gear

zavage schrieb:

I get that always, when i want to chose the d92 ZF and the D83 in this Version. The D86 ZF works finde, but no ZF Sound and the other SD 83ZF and SD 83 ZF 2 Variant theres no sound when it's not in the gear.

https://i.servimg.com/u/f22/15/82/73/44/omsi110.jpg

Well I have everywhere sounds. Only the D92 doesn't work.

zavage schrieb:

I get that always, when i want to chose the d92 ZF and the D83 in this Version. The D86 ZF works finde, but no ZF Sound and the other SD 83ZF and SD 83 ZF 2 Variant theres no sound when it's not in the gear.
https://i.servimg.com/u/f22/15/82/73/44/omsi110.jpg

I have exactly the same problem!

For D92 ZF for me the following file is missing:

Code:

script\cockpit_ZF.osc

Should I copy only the one from SD200 series? (cockpit_zf_83.osc)
--edit--
I tried, but makes only fault..

Just got round to copying the files in to OMSI folder and now OMSI won't start - it says Command error in script for all the .osc files of the MAN SD202.

Ok sorry about that,there were numinous of missing files that were in the update. That is what happens when you issued updates at 1AM in the morning!! So as result i have removed verison 0.7.0 from the server. So version 0.7.0 is a fail!

I apologize for the inconvenience, this newly release version should not cause any issues.

http://www.philadelphiatransitvehicles.info/OMSI/ZF-Script-0.7.1.zip

No please do not do anything additional until I have responded, it works on my OMSI with all of the files intacted. None of the default files of OMSI were never overwritten. If the files which I have issued in an update does not work then the fault is more then likely an missing file. Again, sorry about that.

For this update, it contents needs to be extracted into the \Omsi\Vehicles directory as usual.

It adds three buses to the simulator

SD200 - SD83 - ZF 4HP-500 SE
SD202 - D86 - ZF 5HP-500
SD202 - D92 - ZF 6HP-592

It is extremely important that all of the files are extracted.

harry7430 schrieb:

some problems with D86... upshifting from 3 to 4(around 40) does not work.. i have to lock gear 3 and the upshifting works well beyond 40km/h

and i can't enter the game using D92..

I forgot to program in to add slippage to the 5th grade unlock, that should correct the problem. The fix should be included in the next update. The 5 gear script is the least completed of the other 3, none of the sounds for the 5th speed has been reworked yet but will be reworked shortly. . The current version of the download includes only three versions. With the 4th version, the Early edition of the ZF script, has been put aside for now and is being drastically worked on.

krtz07 schrieb:

Ok sorry about that,there were numinous of missing files that were in the update. That is what happens when you issued updates at 1AM in the morning!! So as result i have removed verison 0.7.0 from the server. So version 0.7.0 is a fail!

I apologize for the inconvenience, this newly release version should not cause any issues.

http://www.philadelphiatransitvehicles.info/OMSI/ZF-Script-0.7.1.zip

No please do not do anything additional until I have responded, it works on my OMSI with all of the files intacted. None of the default files of OMSI were never overwritten. If the files which I have issued in an update does not work then the fault is more then likely an missing file. Again, sorry about that.

For this update, it contents needs to be extracted into the \Omsi\Vehicles directory as usual.

It adds three buses to the simulator

SD200 - SD83 - ZF 4HP-500 SE
SD202 - D86 - ZF 5HP-500
SD202 - D92 - ZF 6HP-592

It is extremely important that all of the files are extracted.

I am not able to open any SD202 or SD200 new ZF version ... :X

Hello Ktrz07, I can't play neither with the SD200 or 202...