Davisville 1.3.1 Final

Ok no problem, what about the junction above?

And would you like to me help you test it before release?

tomtoon schrieb:

Ok no problem, what about the junction above?

And would you like to me help you test it before release?

The junction's traffic lights need to be reversed I assume Sheppard and Bayview, Cummer, and John Street?
I am going to start banning traffic from bus stops, and I don't know about the 11 refusing to show the display. I need to take a closer look. :/ I guess Davisville 1.3 will end up as Davisville 1.2 Beta2
Once I am done with the above, I will release for public testing so everyone can point out bugs and I will try my best to kill them

didnt notice anything wrong at sheppard

You said the juction above, and the picture you showed was near the second stop of 114 North/S11 South

the picture i showed was just as u turn left out of bayview station

Amy Rose schrieb:

tomtoon schrieb:

Ok no problem, what about the junction above?

And would you like to me help you test it before release?

The junction's traffic lights need to be reversed I assume Sheppard and Bayview, Cummer, and John Street?
I am going to start banning traffic from bus stops, and I don't know about the 11 refusing to show the display. I need to take a closer look. :/ I guess Davisville 1.3 will end up as Davisville 1.2 Beta2
Once I am done with the above, I will release for public testing so everyone can point out bugs and I will try my best to kill them

This map is simply great to drive well done for all the work on it I have found the cause of the lines not showing the destinations, it was a slight differance in the TTP files where it showed "Subway_STN" instead of "Subway STN".

Fleetline7221 schrieb:

Amy Rose schrieb:

tomtoon schrieb:

Ok no problem, what about the junction above?

And would you like to me help you test it before release?

The junction's traffic lights need to be reversed I assume Sheppard and Bayview, Cummer, and John Street?
I am going to start banning traffic from bus stops, and I don't know about the 11 refusing to show the display. I need to take a closer look. :/ I guess Davisville 1.3 will end up as Davisville 1.2 Beta2
Once I am done with the above, I will release for public testing so everyone can point out bugs and I will try my best to kill them

This map is simply great to drive well done for all the work on it I have found the cause of the lines not showing the destinations, it was a slight differance in the TTP files where it showed "Subway_STN" instead of "Subway STN".

I will take a look into that, because initially, I thought that OMSI editor would error out or hate having spaces for route creater which is why I put underscores. But will try nonetheless

tomtoon schrieb:

the picture i showed was just as u turn left out of bayview station

If you read the street sign, it would say Sheppard Ave E. So is there a problem with that junction?

yes sorry my fault didnt look at the picture properly

Its alright people make mistakes

I will so make my hometown route when the SDK is out, and when we can drive left hand

I would like to see that as more mappers would be better

totally, we just need left hand buses, and left hand drive(been shown off however)

I would like to speculate that it might be possible in the summer, since people have more free time

Amy Rose schrieb:

I would like to speculate that it might be possible in the summer, since people have more free time

ill be in america/working more in the summer lol

tomtoon schrieb:

Amy Rose schrieb:

I would like to speculate that it might be possible in the summer, since people have more free time

ill be in america/working more in the summer lol

lol, make that some

lol if we see the possibility before hand ill try my best lol

I surely would like to see how you would do and what you are capable of, because I see quite a bit because you are motivated to do it once left had is released

Yeah the thing is, I want to try and make it as real as possible, and with the game as it is, things would be in the wrong place

Well, its been nice talking to you, but I have to eat dinner and then start fixing bugs once I finish my next route which is really close to finishing in terms of roads

Ok amy cya later

Hi,

Just for info, looking through the thread, I see a couple of bug reports where cars are driving through red lights.

This happens where the traffic lights on a side road have been set up with indicator '0' (main) and/or vice versa. So although you may correctly have one flow of traffic lights set up all as '0' and the adjacent flow set up all as '1', in fact the intersections are 'hard coded' and only the minor/smaller of the junction exits can be set as '1' (side), and only the major junction exit can be set as '0'.

(On some junctions it's easy to get the two exchanged).

Cheers,
David.

Again, I will take a look once my roads layout is done which is soon

Right now I am starting to ban all traffic from the bus bays

This map is great !!

But when i am on a drive i se other buses like the S11 and 11 sometimes driving without any destination..

And one other thing... I always have traffic problems :S

I always get stuck in the traffic

But anyway,

Keep up the gr8t work

Gneb B

amy after acacia on the 28, it then said 30 davisville at 18:00:00 however the in cab timetable said 17.45..(and then when I had let the passengers off it changed to 28 Bus Bay 18:00:00)
and as you can see in this picture 30 davisville is the last stop but the 28 on the left is the AI that is holding up traffic, i am pretty sure the layover bay at davisville station should be the last stop



update on the 11 buses not showing: I was waiting at bayview avenue, and an 11 went past heading to steeles (this had a destination display) then just before I was due to depart bayview avenue it a BLANK 11 went past, had no passengers obviously because it had no destination