Davisville 1.3.1 Final

I have officially hit a wall right here. The ai utterly refuses to put up the destination for the E11 (officially 11C) the words aren't printing and the passengers refuse pickup! This route interlines most of the 28 Davisville route, unless you want me to work around it and make it 28 until bayview and then E11 to continue its trip possibly

Gast

I've had this in the past Amy,

It's usually because you haven't listed the 'depot name' (ie... the HOF) within the AI list entry, for the AI groups you're using.

This is the equivalent (for the AI), to us selecting the depot manually when we place a new bus.

Here's a view of part of my AI list for Spandau Modern, that tells the AI to use the D92 buses (the '11' part) and to use the 'M37_137_Spandau' depot file for the AI:

[aigroup]
M37_137_Spandau
1
11
M37_137_Spandau

The first M37_137_Spandau entry is just naming the map that this AI list applies to. The next entry (the '1') is the number of buses in the AI group. The '11' relates to the D92, and the final M37_137_Spandau entry tells the AI to use the M37_137_Spandau depot, which is what displays the destination on the AI buses; if they've been set up properly.

You probably already knew all of this but just trying to help, as I had the same issue, and this was the issue.

Cheers,
David

davidrogers schrieb:: I've had this in the past Amy,

It's usually because you haven't listed the 'depot name' (ie... the HOF) within the AI list entry, for the AI groups you're using.

This is the equivalent (for the AI), to us selecting the depot manually when we place a new bus.

Here's a view of part of my AI list for Spandau Modern, that tells the AI to use the D92 buses (the '11' part) and to use the 'M37_137_Spandau' depot file for the AI:

[aigroup]
M37_137_Spandau
1
11
M37_137_Spandau

The first M37_137_Spandau entry is just naming the map that this AI list applies to. The next entry (the '1') is the number of buses in the AI group. The '11' relates to the D92, and the final M37_137_Spandau entry tells the AI to use the M37_137_Spandau depot, which is what displays the destination on the AI buses; if they've been set up properly.

You probably already knew all of this but just trying to help, as I had the same issue, and this was the issue.

Cheers,
David

Thanks for trying to me, but I know how to force the ai to use a certain bus type, its just that my next route consists of 3 branches and 1 original, and the ai for the first branch utterly refuses to write Bayview @ To Sunnybrook, instead it only writes E11 which is a branch. I will recheck the manual and get back to it to see what I have done utterly wrong. Unless for each route you have to add another aigroup

I will try to see if the problem lays within the bus stop

I am back at work. Any help? If anyone is interested in helping me find the error, I can happily give out the route via E-mail for helping purposes, and the fact that I have little time to do such items

Any Reason why my second route ai refuses to write E11 Bayview - To Sunnybrook and instead it just writes E11. Also, the ai refuses pick up at shared stops, on the stops exclusive to the route is where no one is. I ran out of ideas, and when someone gives me some clue or help on what I did wrong, since I redid everything I did for the 28, except my route has 3 branches, E11, S11, A11, and the original route is 11.
I'm sorry everyone, but this map is temporarily stopped. Sad

If I don't get any help by Saturday morning, I will release the unfinished version of my new route, since I want people to enjoy what I made. The entire route is 19km long and that is one way. Fixes for route 28 Davisville have been applied a good while ago, along with an extra bus if you chose the other route, and the time travelling timetable bug has been fixed. After this map, I will be focusing somewhere else which would be a little inner city, but not too innercity, since OMSI doesn't support streetcars, or what you Europeans call trams, and if you go a bit into the downtown core, theres barely a bus in sight, only 1 direct downtown bus route, the rest is either premium express, or chartered.

I am slightly progressing with the problem!

I am getting closer to the culprit and might be able to release this map. But there has been some sad news lately. Our English mapper, Dave has just left the community due to trolls. A moment of silence in honour of our community loss.

I will return with more updates on my map later

Anzahl der Beiträge : 373 Anmeldedatum : 06.03.11

Amy Rose schrieb:: I am getting closer to the culprit and might be able to release this map. But there has been some sad news lately. Our English mapper, Dave has just left the community due to trolls. A moment of silence in honour of our community loss.

I will return with more updates on my map later

Looking forward to this Amy.. Yep sad news that we lost David

This is odd how I sent someone my files and they don't have the bug :/ I will increase service and release today

Anzahl der Beiträge : 373 Anmeldedatum : 06.03.11

today? great!!! Mind you today for me might be tomorrow.. it's 10pm here Crying or Very sad

Amy Rose schrieb:: This is odd how I sent someone my files and they don't have the bug :/ I will increase service and release today

Make sure that both the SD200 and SD202 directories have the same HOF file, also make sure that the TGA files for the Rollerbands are in their correct location.

If you still have that bug on your verison, then you should not release it yet until it is resolve on your end. Cool

Ok, and as people groan, it has to be pushed back, since I want to create another route than a really long branch, and I want to have Auto announcements on every stops. Embarassed