Bus interior lights?!

I seem to be having a problem with the interior and matrix/roll screen lights. Whenever i switch them on, you can see the bus interior light up very faintly but the actuall lights inside the bus stay dark. In the 4th demo video you can see the actuall light fittings light up. Also, where is the switch to turn on the lights for the matrix/roll screens?!

L, 6, 7, 8, 9 are all important keys for lighting!

Marcel Kuhnt schrieb:

L, 6, 7, 8, 9 are all important keys for lighting!

I know how to switch the lights on, what I'm saying is that when i turn the interior lights on, the bus only barely lights up and the ACTUAL light fittings(the white boxes on the roof of the interior)don't light up. The destination signs also don't light up.

When i click L to turn the headlights on and look at the outside of the bus the actuall bus head/tail lights are lit up yet the interior ones dont.

Options => "Graphics (Advanced)" => Use Material Channels => All Checkboxes checked?

Otherwise please send us screenshots to demonstrate your problem, I am not quite sure if I have understand it...?

Maybe your board electricity has broken down? Try with a "fresh" bus: Press E and then L: The headlights and the destination display lights light up. Then there's 7,8 and 9 for the interiour lights. This should work for the lamp fittings normally DO light up

So buses electricity can break down?

I'm asking because I was driving the 92 coming into Stadtgrenze when all electricity cut out on my bus and I couldn't get it going again, but it drove fine. IF this an added in feature it is so cool and adds another dimension of realism!

Yes, this can happen if you have a heavier crash so that battery and generator fail. To repair the bus, just click on the wrench icon in the menu. Then everything starts working properly again.