[05.06.2011/UPDATE] --> New Berlin-Spandau Map V1.4 + New Route Map for all lines :)

EirikhO schrieb:

Had to edit the hof file of the SD200 buses to make Olympiastadion show up for the express service on the rollblind buses (no 56 on the rollblind I think), the HOF file wanted me to open Olympiastadion, while it did not exist (resulting in a blank screen). Changed it to Bln_Olympiastadion which solved the issue, would be nice if you could update your file accordingly so I (and other rollblind lovers ) don't have to do this manually each time the map is updated

If you want to drive an express line with rollband bus, you should take a look at the linelist inside the vehicle.
You can get correct code for this destination for example from line 63 or 34N information.

This my map is set according to this linelist, otherwise it could not be needed.
Code for Olympiastadion with correct texture is 033.
And that's all.

Regards.

CristianSkytter schrieb:

EirikhO schrieb:

Had to edit the hof file of the SD200 buses to make Olympiastadion show up for the express service on the rollblind buses (no 56 on the rollblind I think), the HOF file wanted me to open Olympiastadion, while it did not exist (resulting in a blank screen). Changed it to Bln_Olympiastadion which solved the issue, would be nice if you could update your file accordingly so I (and other rollblind lovers ) don't have to do this manually each time the map is updated

If you want to drive an express line with rollband bus, you should take a look at the linelist inside the vehicle.
You can get correct code for this destination for example from line 63 or 34N information.

This my map is set according to this linelist, otherwise it could not be needed.
Code for Olympiastadion with correct texture is 033.
And that's all.

Regards.

The passengers refused to enter when I used Olympiastadion with 033, I had to use 56. If I stand (with an ANNAX bus) at Stadtgrenze with the normal Olympastadion text up front(174) they refuse to board, but if I show the express Olympiastadion destination (306) they happily jump on.

EirikhO schrieb:

The passengers refused to enter when I used Olympiastadion with 033, I had to use 56. If I stand (with an ANNAX bus) at Stadtgrenze with the normal Olympastadion text up front(174) they refuse to board, but if I show the express Olympiastadion destination (306) they happily jump on.

No problem.
It will be fixed

I will add these codes to the linelist for rollband buses as well.

Regards.

EDawg schrieb:

Mr Drive schrieb:

Hi Cristian,

(and get a argue with my girlfriend for driving that F*** bus again)

Damn I had the same issue! Anyone knows how to fix this one?

I even tried giving her money to go out shopping.

Try to let drive her a short trip...

Back to this topic: I don't have any problems with this V1.2. Everything is running smoothly.

The new route of the 54 is nice with some narrow streets and sharp turns along the way.

There are some problems with announcements, on the express route 100. At Stadgrenze there is an old original announcement and at Olympicstadium there is no announcement.

Mr Drive schrieb:

EDawg schrieb:

Mr Drive schrieb:

Hi Cristian,

(and get a argue with my girlfriend for driving that F*** bus again)

Damn I had the same issue! Anyone knows how to fix this one?

I even tried giving her money to go out shopping.

Try to let drive her a short trip...

Back to this topic: I don't have any problems with this V1.2. Everything is running smoothly.

The new route of the 54 is nice with some narrow streets and sharp turns along the way.

Agreed Thanks for the great Map Chris. I Had no freaking issue since V100 :DDDD

Thanks guys for your good words!
It makes me more motivated to keep working on this project!

I can tell you now that next update will include new area - S Bahnhof Staaken with new line.

and995 schrieb:

There are some problems with announcements, on the express route 100. At Stadgrenze there is an old original announcement and at Olympicstadium there is no announcement.

Please make sure you have set a "1000" value of max. sound count in option menu.

Regards.

EDawg schrieb:

Mr Drive schrieb:

Hi Cristian,

(and get a argue with my girlfriend for driving that F*** bus again)

Damn I had the same issue! Anyone knows how to fix this one?

I even tried giving her money to go out shopping.

I USED to have this problem

EDawg schrieb:

Like JunGRail stated in an earlier post, I also manually install all addons. For some reason wipzip will add a extra folder in the OMSI folder if you use the self-extract option. For example C:\.....\OMSI\MAPS\MAPS\New Berlin-Spandau Map, Instead of C:\.....\OMSI\MAPS\New Berlin-Spandau Map. So I always manually extract the files to their proper location.

BTW Cristian, I didn't get that error you mentioned some people may get with V1.2. All in All great map and looking forward to those Map extensions.

Agreed with EDawg, just makes life a lot easier, plus it gives you an insight where you may of put a foot wrong if you put something where you shouldn't have.

Thanks for this new version, I love the 'new' 54! It's amazing. Keep up the good work, well done!

Hello!
Insert a "New Berlin-Spandau Map V1.2" and downloading maps gives an error "Integeruberlauf" and further will not boot. When you install version 1.0 everything works fine. Help solve the problem, what should I do?
Thank you all. Sorry for my english, I'm from Russia.

nik57 schrieb:

Hello!
Insert a "New Berlin-Spandau Map V1.2" and downloading maps gives an error "Integeruberlauf" and further will not boot. When you install version 1.0 everything works fine. Help solve the problem, what should I do?
Thank you all. Sorry for my english, I'm from Russia.

Try to unpack files manually (not by replacing 'Omsi' folder).
Maybe that's the reason.

CristianSkytter schrieb:

nik57 schrieb:

Hello!
Insert a "New Berlin-Spandau Map V1.2" and downloading maps gives an error "Integeruberlauf" and further will not boot. When you install version 1.0 everything works fine. Help solve the problem, what should I do?
Thank you all. Sorry for my english, I'm from Russia.

Try to unpack files manually (not by replacing 'Omsi' folder).
Maybe that's the reason.

I tried to copy the folder "New Berlin-Spandau Map" folder "omsi \ maps" and the same an error "Integeruberlauf".
When I copied from the version 1.0 file "tile_-10_9.map" folder "omsi \ maps \ New Berlin-Spandau Map", then the map is loaded by issuing a warning to an error in the file "DEPOT Waldkrank .. ttr".
Thank you for your reply.

nik57 schrieb:

I tried to copy the folder "New Berlin-Spandau Map" folder "omsi \ maps" and the same an error "Integeruberlauf".
When I copied from the version 1.0 file "tile_-10_9.map" folder "omsi \ maps \ New Berlin-Spandau Map", then the map is loaded by issuing a warning to an error in the file "DEPOT Waldkrank .. ttr".
Thank you for your reply.

While installing V1.2 it's necessary to delete previous folder of outdated map and then unpack new one.

Regards.

CristianSkytter schrieb:

While installing V1.2 it's necessary to delete previous folder of outdated map and then unpack new one.

Regards.

I did so, remove the old version and then installed the new one. By the way with 1.1 same error gave out. Only version 1.0 works fine. What else do advise how to fix the error?
Thank you for your reply.

Maybe try to reduce your settings or something.
Becasue it's due to your pc, not map for sure.

CristianSkytter schrieb:

Maybe try to reduce your settings or something.
Becasue it's due to your pc, not map for sure.

I copied the file "31.ttl" from version 1.0 to the folder "maps\TTData" with the replacement and the map was loaded.
When you boot gives message can not find files in the folder "Sceneryobjects\ADDON_SimpleStreets":

1. 4spur_herr_12mseeburg.sco
2. seeburger_11_12m.sco
3. RQ_15, 5_2spur_11, 5m_Sidewalk.sli
4. RQ_9, 5_2spur_6, 5m_Sidewalk.sli
5. RQ_10, 5_2spur_7, 5m_Sidewalk.sli

You can follow any responses to help me with these files?
Thank you for your help.

nik57 schrieb:

CristianSkytter schrieb:

Maybe try to reduce your settings or something.
Becasue it's due to your pc, not map for sure.

I copied the file "31.ttl" from version 1.0 to the folder "maps\TTData" with the replacement and the map was loaded.
When you boot gives message can not find files in the folder "Sceneryobjects\ADDON_SimpleStreets":

1. 4spur_herr_12mseeburg.sco
2. seeburger_11_12m.sco
3. RQ_15, 5_2spur_11, 5m_Sidewalk.sli
4. RQ_9, 5_2spur_6, 5m_Sidewalk.sli
5. RQ_10, 5_2spur_7, 5m_Sidewalk.sli

You can follow any responses to help me with these files?
Thank you for your help.

Download SimpleStreets https://omnibussimulator.forumieren.com/t3917-simplestreets-work-in-progress-in-entwicklung

EirikhO schrieb:

nik57 schrieb:

CristianSkytter schrieb:

Maybe try to reduce your settings or something.
Becasue it's due to your pc, not map for sure.

I copied the file "31.ttl" from version 1.0 to the folder "maps\TTData" with the replacement and the map was loaded.
When you boot gives message can not find files in the folder "Sceneryobjects\ADDON_SimpleStreets":

1. 4spur_herr_12mseeburg.sco
2. seeburger_11_12m.sco
3. RQ_15, 5_2spur_11, 5m_Sidewalk.sli
4. RQ_9, 5_2spur_6, 5m_Sidewalk.sli
5. RQ_10, 5_2spur_7, 5m_Sidewalk.sli

You can follow any responses to help me with these files?
Thank you for your help.

Download SimpleStreets https://omnibussimulator.forumieren.com/t3917-simplestreets-work-in-progress-in-entwicklung

I installed "ADDON_SimpleStreets", but these files are not there. Can anyone help with these files?

Hello
I wonder why the buses do not work in version V.1.2. Buses operate elsewhere and in earlier versions as well. Nature is the only white! Do you know the reason or not I can not play the latest version ..
Attached Images
Sorry for my bad english I used google translator.

nik57 schrieb:

CristianSkytter schrieb:

Maybe try to reduce your settings or something.
Becasue it's due to your pc, not map for sure.

I copied the file "31.ttl" from version 1.0 to the folder "maps\TTData" with the replacement and the map was loaded.
When you boot gives message can not find files in the folder "Sceneryobjects\ADDON_SimpleStreets":

1. 4spur_herr_12mseeburg.sco
2. seeburger_11_12m.sco
3. RQ_15, 5_2spur_11, 5m_Sidewalk.sli
4. RQ_9, 5_2spur_6, 5m_Sidewalk.sli
5. RQ_10, 5_2spur_7, 5m_Sidewalk.sli

You can follow any responses to help me with these files?
Thank you for your help.

You will find the answer in my first post.

Omsibest schrieb:

Hello
I wonder why the buses do not work in version V.1.2. Buses operate elsewhere and in earlier versions as well. Nature is the only white! Do you know the reason or not I can not play the latest version ..
Attached Images
Sorry for my bad english I used google translator.

It looks like a problem with graphic card or its drivers.
It never happened to me.

CristianSkytter schrieb:

nik57 schrieb:

CristianSkytter schrieb:

Maybe try to reduce your settings or something.
Becasue it's due to your pc, not map for sure.

I copied the file "31.ttl" from version 1.0 to the folder "maps\TTData" with the replacement and the map was loaded.
When you boot gives message can not find files in the folder "Sceneryobjects\ADDON_SimpleStreets":

1. 4spur_herr_12mseeburg.sco
2. seeburger_11_12m.sco
3. RQ_15, 5_2spur_11, 5m_Sidewalk.sli
4. RQ_9, 5_2spur_6, 5m_Sidewalk.sli
5. RQ_10, 5_2spur_7, 5m_Sidewalk.sli

You can follow any responses to help me with these files?
Thank you for your help.

You will find the answer in my first post.

Omsibest schrieb:

Hello
I wonder why the buses do not work in version V.1.2. Buses operate elsewhere and in earlier versions as well. Nature is the only white! Do you know the reason or not I can not play the latest version ..
Attached Images
Sorry for my bad english I used google translator.

It looks like a problem with graphic card or its drivers.
It never happened to me.

Your problem looks definitely like a problem with your graphic cards. I'll think you're framerate is to low. Omsi and in special the map of Cristain needs a lot of resources. Try to put your graphic settings to a lower setting en choose for the AI-Traffic low option.

Maybe that will help you.

Can you give your system specs?

Thank you MR Drive. Now the map is working normally and I can continue playing. Thank you very much.

Mr Drive schrieb:

CristianSkytter schrieb:

nik57 schrieb:

CristianSkytter schrieb:

Maybe try to reduce your settings or something.
Becasue it's due to your pc, not map for sure.

I copied the file "31.ttl" from version 1.0 to the folder "maps\TTData" with the replacement and the map was loaded.
When you boot gives message can not find files in the folder "Sceneryobjects\ADDON_SimpleStreets":

1. 4spur_herr_12mseeburg.sco
2. seeburger_11_12m.sco
3. RQ_15, 5_2spur_11, 5m_Sidewalk.sli
4. RQ_9, 5_2spur_6, 5m_Sidewalk.sli
5. RQ_10, 5_2spur_7, 5m_Sidewalk.sli

You can follow any responses to help me with these files?
Thank you for your help.

You will find the answer in my first post.

Omsibest schrieb:

Hello
I wonder why the buses do not work in version V.1.2. Buses operate elsewhere and in earlier versions as well. Nature is the only white! Do you know the reason or not I can not play the latest version ..
Attached Images
Sorry for my bad english I used google translator.

It looks like a problem with graphic card or its drivers.
It never happened to me.

Your problem looks definitely like a problem with your graphic cards. I'll think you're framerate is to low. Omsi and in special the map of Cristain needs a lot of resources. Try to put your graphic settings to a lower setting en choose for the AI-Traffic low option.

Maybe that will help you.

Can you give your system specs?

I installed the missing files, then replace the file "31.ttl" from version 1.0 and now map is loaded without error. Everyone who responded thank you very much. The problem was in the file "31.ttl".

nik57 schrieb:

I installed the missing files, then replace the file "31.ttl" from version 1.0 and now map is loaded without error. Everyone who responded thank you very much. The problem was in the file "31.ttl".

Omsibest schrieb:

Thank you MR Drive. Now the map is working normally and I can continue playing. Thank you very much.

Ok, I'm happy you can enjoy now


I'll check this file, but it works for most people (for me too) anyway.

Regards.