[05.06.2011/UPDATE] --> New Berlin-Spandau Map V1.4 + New Route Map for all lines :)

Startrekkevster schrieb:

Been having problems with this map for a while now & have options settings for what you have put on the readme & the problems i keep getting are map loads & can slect bus & a load point but after around 5-15 mins comes up saying a graphic format problem & then all vehicles & people turn to white!! Also quite a fair bit of lag in some places even at night! is there a solution to this problem as i think it is an amazing add on but just frustrates me when this happens!

It's just the way it is.
Most of us have some problems with that.
You can always try to change intensity of AI lines according to HERE, YOU WILL FIND ALL YOU NEED.txt file.
It's available and working from V1.3 !

EDawg schrieb:

Sweet Great work Cristian. This map just gets better and better

2 observations I've made;

1. I noticed that the route 80 Rollband buses going towards S Bahnhof Staaken isn't showing destinations signs. Not sure if it happens with the Matrix buses. I've only seen Rollband buses on the route so far.
2. The directional arrow to tell us to make the left on Klosterstr heading towards U Rathaus Spd. Funny thing is I drove this area so much that I recognized the area and knew had to make that left to get to U Rathaus Spd.

1) They should show destination.
Make sure you have extracted new rollband texture to proper folder.

2) Oh boy ! My bad, sorry.


Thanks for your feedbacks and good words !
I wish you, all, great time !

Regards.

Was the texture in this update or or previous? The only texture in this file was for the line list.

EDawg schrieb:

Was the texture in this update or or previous? The only texture in this file was for the line list.

It's included in V1.3 package.

Folder Vehicles\Anzeigen\Rollband_SD79\staaken.tga

Regards.

CristianSkytter schrieb:

EDawg schrieb:

Was the texture in this update or or previous? The only texture in this file was for the line list.

It's included in V1.3 package.

Folder Vehicles\Anzeigen\Rollband_SD79\staaken.tga

Regards.

DOH! My bad I didn't install the new texture. I missed it! Stupid me

Has the new update sorted the Frame rate stability?

I keep getting 16, 18, 19, 20, 19, 17, 16 - 20 for about 2 seconds the longest - 12, 10, 19, 18 - Is there any specific graphic settings for this map since it's so huge

A stable frame rate would make things better.

JunGRail schrieb:

Has the new update sorted the Frame rate stability?

I keep getting 16, 18, 19, 20, 19, 17, 16 - 20 for about 2 seconds the longest - 12, 10, 19, 18 - Is there any specific graphic settings for this map since it's so huge

A stable frame rate would make things better.

Depending on your PC, but lower setting are recommended (especially AI traffic).
That's the thing what bothers me the most, size of this map ;(

Der Geistfahrer schrieb:

Hey dude, hello again Your update is super congratulations again, there is no missing object warnings now while opening

But i have a question to you: Why i cannot see the AI BUSSES still only with original paint or advertising I do not understand this, because i have made all my settings as you told in package. But my repaints can only be seen on my own bus, the AI BUSES do not appear except for original advertisings. It occurs only in your map, when i open another map every repaints in my list can be seen on traffic

Please help me if you can, kind regards

It's because of ailist.cfg.
Instead of blank fields, you shuold add repaint name for bus to AI group called Hof Spandau and for express line group Linia 100, e.g:

NO REPAINTS:

Code:

SD83: ---------------------------

[aigroup_depot_typgroup]
4
3257

3258

3259

3261

[end]

WITH REPAINTS:

Code:

SD83: ---------------------------

[aigroup_depot_typgroup]
4
3257
<repaint_name>
3258
<repaint_name>
3259
<repaint_name>
3261
<repaint_name>
[end]

Other people usually do not use [aigroup_depot] keyword (they use [aigroup]). Becasue of many lines I have to keep it like this. Also I don't want 'ghost buses' in my map (when bus travels as unscheduled AI traffic like regular car or something )

Regards.

Oh my God, should i write all repaint names like that if i want to see them in traffic i got schocked because other maps does not want to make this, even other Berlin maps

Ok man, thanks for explanations and help but it is impossible to write all repaint lists there, it takes too long I love this map and it does not matter to see AI BUS only in original Uniform My bus can wear whatever i want and it is enough

Der Geistfahrer schrieb:

Oh my God, should i write all repaint names like that if i want to see them in traffic i got schocked because other maps does not want to make this, even other Berlin maps

Ok man, thanks for explanations and help but it is impossible to write all repaint lists there, it takes too long I love this map and it does not matter to see AI BUS only in original Uniform My bus can wear whatever i want and it is enough

Not so hard I guess
It takes up to 5 mins

You can always make a backup of ailist.cfg. This file in not going to be changed.
After uptade installation, you can overwrite this file with backup
I always do that.

Regards.

I ran the 80 from Staaken to Zoolog Garten - But on return there's no rollblind for Staaken S Bahnhof? I copied the .hof file to the SD200 series folder and the rollsigns to Rollsign SD79 but nothing shows up even when i set the destination via the option menu.

Albeit, the route runs fine, if anyone has a high end system with frame issues, set the Neighbour Tiles to 6 and the viewing distance to 900 or so then the min obj screensize to 1.80 or around that, leave the frame rate at 41, this works on every map for me as longer routes and bigger maps need a higher setting it seems on the tile side, as setting it lower, causes some seriously low frames.

Specially seeing as the long straight to Zoolog Garten on the 97 is pretty fast loading all those tiles quickly 1 at a time is too much. It's odd but it works for me.

The error occurs when running version 1.3. When I run 1.0 errors was not.
Tell me why?

JunGRail schrieb:

I ran the 80 from Staaken to Zoolog Garten - But on return there's no rollblind for Staaken S Bahnhof? I copied the .hof file to the SD200 series folder and the rollsigns to Rollsign SD79 but nothing shows up even when i set the destination via the option menu.

I am not sure about this problem with no texture for Staaken Bahnhof.
I tested it and it works everytime for me.
For rollband buses proper code is 105, for MATRIX buses it's 344. Exactly like the linelist shows.

Can you check in Berlin.hof file this terminus ? Is staaken.tga file assigned to S Bahnhof Staaken ?
It must be like this:

Code:

105:
[addterminus]
344
S Bahnhof Staaken
S BAHN STAAKEN
  S - BAHNHOF
    STAAKEN
S BAHN STAAKEN
staaken.tga
S Bahnhof Staaken

Does anybody else notice it?

JunGRail schrieb:

Albeit, the route runs fine, if anyone has a high end system with frame issues, set the Neighbour Tiles to 6 and the viewing distance to 900 or so then the min obj screensize to 1.80 or around that, leave the frame rate at 41, this works on every map for me as longer routes and bigger maps need a higher setting it seems on the tile side, as setting it lower, causes some seriously low frames.

Specially seeing as the long straight to Zoolog Garten on the 97 is pretty fast loading all those tiles quickly 1 at a time is too much. It's odd but it works for me.

My settings for New Berlin Spandau is :
FPS -> 26 (It's not getting more than 30 even if I change to 50 for example)
Neighbour Tiles -> 2 (I doubt that more of tiles is needed)
Viewing distance -> 581
Min obj screensize -> 1,50%

and it works good. It's not so 'laggy'.

Every PC is diffrent and everybody has to set options according to its PC. Just like you

Unnamed schrieb:

The error occurs when running version 1.3. When I run 1.0 errors was not.
Tell me why?

You have to launch the game in 'Load map without buses' mode, not 'Last situation on map' for the first time !

Regards.

I'm doing, still does not boot.

Unnamed schrieb:

I'm doing, still does not boot.

Have you removed outdated map folder before V1.3 unpacking?

Auch bekomme ich diese Fehlermeldung. Ich habe alle Anweisungen und begann ohne Karte mit dem Bus, bitte helfen dieses Problem zu lösen [img][/img]

CristianSkytter schrieb:

Unnamed schrieb:

I'm doing, still does not boot.

Have you removed outdated map folder before V1.3 unpacking?

yes

That sounds kinda weird...
Probably it must be a problem on your side, guys.

What about other maps? Original Berlin?

In first glance I thought it can be due to the german special letters, but it's absolutely not.

Everything else works.
Game Licensing 1.01

Can be a problem because of the localization?

Unnamed schrieb:

Everything else works.
Game Licensing 1.01

Can be a problem because of the localization?

Can you remove all files from TTData folder of map and see the result?

Map start up

Unnamed schrieb:

Map start up

dann ist das Problem in den Ordner TTData? und wie man es lösen?

Unnamed schrieb:

Map start up

I have version 1.3 is also not loaded. I have a folder "TTData" has replaced only one file "31.ttl" and after this map is loaded without problems. The same thing I had with version 1.1 and 1.2

nik57 schrieb:

Unnamed schrieb:

Map start up

I have version 1.3 is also not loaded. I have a folder "TTData" has replaced only one file "31.ttl" and after this map is loaded without problems. The same thing I had with version 1.1 and 1.2

Danke, ich diese Datei gelöscht und die Karte funktioniert, aber warum diese Datei verhindert, dass bestimmte Belastung der Karte ohne Fehler?

Ok, so we've got the reason.
I remember that someone had similar problem with V1.2 version. It was becasue of '31.ttl' file as well (like nik57 said)

I'll have a look what's going on with that and will try to fix this issue.


Thank you and regards.

nik57 schrieb:

Unnamed schrieb:

Map start up

I have version 1.3 is also not loaded. I have a folder "TTData" has replaced only one file "31.ttl" and after this map is loaded without problems. The same thing I had with version 1.1 and 1.2

Same to me, after replacing 31.ttl from first version map loads as it should.