FBW 549 - addon bus for OMSI

I'm with jerry@sw on this, I still cannot find that part for the 3rd door AI fix, not to mention that I cannot even get the bus to be used by the AI without crashing the game.

Hi,

@kosakkosak:
thank you very much for this bus model, great work !!

---------
Hallo an alle anderen !

Ich hab aber leider auch das Problem, dass ich den Bus (im Gegensatz zu allen anderen Bussen also auch dem Karossa) nicht von der Stelle kriege wenn ich wie folgt vorgehe:

• Gangschaltung Neutral (N)
  
• Batterie an (E)
  
• Motor an (M)
  
• Hamdbremse raus (.)
  
• Gangschaltung Drive (D)

Wenn ich dann den Gang eingelegt habe, springt dieser NICHT zurück bleibt also sichtbar in der 1. Stellung (Drive hoffe ich mal).

Danach gebe ich Gas, der Bus rührt sich jedoch leider nicht von der Stelle. Es ist egal in welcher Reihenfolge ich es anstelle bzw. egal ob über mein Lenkrad oder über die Tastatur.

Hat jemand von euch vlt. eine Idee woran es liegen könnte ?

DANKE !

Liebe Grüße,
Thomas

Probiers mal mit Maussteuerung.

Der Bus hat 3 Gänge, 1. Gang, 2. Gang und 3. Gang
also 1, 2 und 3
D hilft da nix ... wenn ich mich da jetzt nicht irre.

hesostein schrieb:

Der Bus hat 3 Gänge, 1. Gang, 2. Gang und 3. Gang
also 1, 2 und 3
D hilft da nix ... wenn ich mich da jetzt nicht irre.

Doch, du verwechselst es wohl mit dem Karosa, bei dem muss man anch dem D noch 1 drücken, für den 1. Gang

Mmh stimmt, verwechselt.

Abeer ma eben zum Bus:
Good job Kosak.
The only thing I don't like is the "target display".
There it is like:
---------------------
Einsteindorf
Krankenhaus
Krankenhaus
---------------------
Map: Grundorf

So it's two times the second line.

you need to edit the .hof file and remove the 3rd line

Amy Rose schrieb:

you need to edit the .hof file and remove the 3rd line

Amy I have done this but maybe you can make one for your Davisville map so everyone that downloads it can use this bus

Hi, I have a little problem with route system.I can normally write bus number but when ı come route number the bus computer ( ı dont know what it calls) don't accept the route. This problem only happens in this bus. I tried with MAN buses and this problem didnt occurred.

copy all .hof files fro the sd 200 or sd202 folder to FBW 549 and then try it again

jerry@sw schrieb:

BahnFan2014 schrieb:

Hello,

here is a little AI-Fix (the AI don't close the 3rd door):

Open ../scripts/door.osc

Find:

Code:

   (L.L.doorTarget_0)
   {if}
      (M.L.trg_bus_doorfront0)
      0 (S.L.door_AI_timer)
   {endif}
   
   (L.L.doorTarget_0) (L.L.door_AI_timer) 0.3 > &&
   {if}
      (M.L.trg_bus_doorfront0)
   {endif}

Replace with:

Code:

   (L.L.doorTarget_0)
   (L.L.doorTarget_1)
   (L.L.doorTarget_5)
   {if}
      (M.L.trg_bus_doorfront0)
      (M.L.trg_bus_doorfront1)
      (M.L.trg_bus_doorfront5)
      0 (S.L.door_AI_timer)
   {endif}
   
   (L.L.doorTarget_0) (L.L.door_AI_timer) 0.3 > &&
   {if}
      (M.L.trg_bus_doorfront0)
   {endif}

Dont find this part..

I still cant find the above code to fix the 3rd door, there a many entries with the code "(L.L.doorTarget_0)" and trying to find the right one is very hard.

JPG619 schrieb:

Amy Rose schrieb:

you need to edit the .hof file and remove the 3rd line

Amy I have done this but maybe you can make one for your Davisville map so everyone that downloads it can use this bus

I have created some time ago HOF-Creator templates which should make it easier to create HOF-files for this bus (and for the other addon buses) with the HOF-Creator by Janniboy.

skin schrieb:

The third door is with doorfront5 name.

Still haven't got a clue, will someone please upload the modified file with necessary changes so that the AI drivers can close the third door.

Is this the right code?

Code:

(L.L.doorTarget_0) ! (L.L.door_AI_timer) 0.3 > &&
      {if}
         (M.L.trg_bus_doorfront0)
      {endif}
      (L.L.doorTarget_1) ! (L.L.door_AI_timer) 0.6 > &&
      {if}
         (M.L.trg_bus_doorfront1)
      {endif}
      (L.L.doorTarget_5) ! (L.L.door_AI_timer) 0.6 > &&
      {if}
         (M.L.trg_bus_doorfront5)
      {endif}

Ralph Kramden schrieb:

skin schrieb:

The third door is with doorfront5 name.

Still haven't got a clue, will someone please upload the modified file with necessary changes so that the AI drivers can close the third door.

Is this the right code?

Code:

(L.L.doorTarget_0) ! (L.L.door_AI_timer) 0.3 > &&
      {if}
         (M.L.trg_bus_doorfront0)
      {endif}
      (L.L.doorTarget_1) ! (L.L.door_AI_timer) 0.6 > &&
      {if}
         (M.L.trg_bus_doorfront1)
      {endif}
      (L.L.doorTarget_5) ! (L.L.door_AI_timer) 0.6 > &&
      {if}
         (M.L.trg_bus_doorfront5)
      {endif}

+1

+1 wtf?

Never mind i've uninstalled it & ill wait until Kosak can be arsed to fix it.

Okay, for those who are still trying to get the third door AI problem fixed, I've found the problem why people CANNOT find the lines of code. If you are like me and have been searching the script countless times. it is quite likely you are being mislead to looking for the WRONG line/code.

Everyone is looking for this line of coding:

Code:

  (L.L.doorTarget_0)
  {if}
      (M.L.trg_bus_doorfront0)
      0 (S.L.door_AI_timer)
  {endif}
 
  (L.L.doorTarget_0) (L.L.door_AI_timer) 0.3 > &&
  {if}
      (M.L.trg_bus_doorfront0)
  {endif}

However when going through it myself, I couldn't find this coding, what I could find was this:

Code:

  (L.L.doorTarget_1)
  {if}
      (M.L.trg_bus_doorfront0)
      0 (S.L.door_AI_timer)
  {endif}
 
  (L.L.doorTarget_0) (L.L.door_AI_timer) 0.3 > &&
  {if}
      (M.L.trg_bus_doorfront0)
  {endif}

Replace that with:

Code:

  (L.L.doorTarget_0)
  (L.L.doorTarget_1)
  (L.L.doorTarget_5)
  {if}
      (M.L.trg_bus_doorfront0)
      (M.L.trg_bus_doorfront1)
      (M.L.trg_bus_doorfront5)
      0 (S.L.door_AI_timer)
  {endif}
 
  (L.L.doorTarget_0) (L.L.door_AI_timer) 0.3 > &&
  {if}
      (M.L.trg_bus_doorfront0)
  {endif}

So this I altered with the new line of code thats out and Voila! It worked perfectly!

And if anyone is STILL having troubles with this script, contact me, if you can PM me that works perfectly and I'll give you the pre-edited script.

Think it would be better to have the destination on the left of the number in bigger font, then the via part on the right of the number

I've uploaded the fix here: http://www.trsdortmund.net/downloads/door.osc

WARNING:
Modifications of the OSC-File will be deleted!

Edit: File fixed (I uploaded the wrong file)

Ich hab ein Problem mit der Geldannahme. Die Tickets liegen ja links, das Geld aber auf der rechten Seite und dort kann ich nicht hinschauen, um das Geld wegzunehmen. Was kann man da machen?

Ralph Kramden schrieb:

+1 wtf?

Never mind i've uninstalled it & ill wait until Kosak can be arsed to fix it.

+1, if you don't know, it means that I agree with you. A lot of us are having the same problem! So relax, it's not that serious....

Thanks

Danke

BahnFan2014 schrieb:

I've uploaded the fix here: http://www.trsdortmund.net/downloads/door.osc

WARNING:
Modifications of the OSC-File will be deleted!

Edit: File fixed (I uploaded the wrong file)

EDawg schrieb:

Ralph Kramden schrieb:

+1 wtf?

Never mind i've uninstalled it & ill wait until Kosak can be arsed to fix it.

+1, if you don't know, it means that I agree with you. A lot of us are having the same problem! So relax, it's not that serious....

Already got the fix so your post is pointless

Ralph Kramden schrieb:

EDawg schrieb:

Ralph Kramden schrieb:

+1 wtf?

Never mind i've uninstalled it & ill wait until Kosak can be arsed to fix it.

+1, if you don't know, it means that I agree with you. A lot of us are having the same problem! So relax, it's not that serious....

Already got the fix so your post is pointless

Explain, how is it pointless? Again it's not that serious!

Hello kosakosak,
first:good job!!! very nice(the bus Fbw 549
i think it was difficult to make this bus...
Can you make a new bus???
Many people in this forum wish this bus.
http://www.stoetzel-gruppe.de/images/fuhrpark/man-nl-202.jpg
Can you make this bus?
Please
and please answer me with PM(personal message)
Thanks
[My Englisch is not very good.i hope you can understand me.]
Bye Postbus09