OMSI - Logitech Driving Force GT Setup Guide.

Hi, I tried doing that but what happens is now when I try to drive the bus, it is accelerating by itself without me pushing on the pedal. And the brakes don't work. So those settings don't work either.

Mr_OC_Benz schrieb:

Hi, I tried doing that but what happens is now when I try to drive the bus, it is accelerating by itself without me pushing on the pedal. And the brakes don't work. So those settings don't work either.

remember to check the "rev" boxes on accelerator and brake

Another tip is to press the brake pedal in the options menu and when you see a bar move across, that tells you which is the brake in them settings, then just change brake to that control, remember to check rev boxes for accelerator and brake though or they'll behave as if you have them both pressed in constantly.

I had the rev boxes checked for both.

However I only ever see a bar move across for the X and Y axis and nothing else.

For kickdown, I just hover my foot about half way until it builds up speed, and just as it gets going in second, I ram the throttle right down and it goes back to first and flies round the map. If I try and whack the pedal straight away, it doesn't work as well and bugs the sound on the SD202's anyway

With the default Voith transmissions, to kickdown you must plant your foot to the floor (or almost), but with the addon ZF gearboxes just lightly double-tap the accelerator (not much pressure) and it will kick down.

The above does not work with the Driving Force GT controller. I have tried that many times.

Planting my foot on the ground only revs the bus to its max capability without kickdown.

It'd be something to do with the settings which I am no longer sure about as I have tried virtually any possible outcome.

Hey,

thankyou for the very nice Setup-Guide. Now i can use the full function of my Driving Force GT. The first test at "Grundorf" is very very nice!

Greetings
fdlbc

Finally sorted out the problems with my wheel and all is working well...